What cartridge emulators and springs fit PE/RS forks?
May 5, 2020 22:22:15 GMT
Admin and Chuck78 like this
Post by ESR80PE on May 5, 2020 22:22:15 GMT
What Race Tech Emulators do I need for my PE/RS?
36mm forks - Use FEGV 3301
38mm forks - Use FEGV 3801
* NOTE - RS owners please measure the ID of your fork tubes first to verify that 26.5mm OD emaulator fill fit inside the leg. It’s a possibly that Suzuki used different thickness for the wall of the tubes and this has not been verified.
* NOTE – 77 PE250 owners, you will need emulator adapters.
See list here - racetech.com/download/FEGV_Emulators.xls
They will probably be FPEV AD3307 P as used in 1977 RM250 but please check with Race Tech to be 100% sure racetech.com/page/id/18
For Fork Springs
racetech.com/page/title/FRSP-RT%20Fork%20Spring%20List
racetech.com/download/FRSP-RTForkSpringsWeb.xls
36mm forks – Use - series FRSP 2550
38mm forks – Use - series FRSP 3055
For More information
Introduction To Emulators
www.youtube.com/watch?v=j3QYZEQoN_M&t=13s
Emulator General Fitting Requirements
racetech.com/page/title/Emulator%20Fitting
racetech.com/download/IP_FEGV_FIT_web.pdf
Dirt Emulator Fitting Instructions for FEGV 3301 & 3801
racetech.com/download/InstructPDF/IP%20FEGV%20D%20Emulator-DIRT.pdf
Emulator Tuning Guide & Setup
racetech.com/page/title/Emulator%20Tuning%20Guide
racetech.com/download/IP%20FEGV%20TUNE.pdf
Emulator Alternate Valve Springs
racetech.com/download/FEGV_Emulators.xls
FPEV VS026 EMU VALVE SPRING 26 lb CHROME
FPEV VS040 EMU VALVE SPRING 40 lb BLUE
FPEV VS064 EMU VALVE SPRING 64 lb YELLOW
FPEV VS101 EMU VALVE SPRING 101 lb RED
